|
|
|
|
 It’s time to take the next step. Save Money, time and storage space with Viking Electric's Lamp Recycling Program! Recycle your lamps, ballasts, batteries and electronic waste effectively and efficiently.
|
|
| |
|
|
| Home > Product & Industry Updates > New Product |
 New Product |
|
Wattstopper IsoleTM IDP-3050 Power Strip
Isole Plug Load Controls with Personal Sensor. Why keep plug loads operating when no one is there to use them? Isole ends the energy waste by turning plug loads on and off based on occupancy.
The Isole IDP-3050 consists of an eight-outlet power strip with surge protection and a personal occupancy sensor that utilizes the latest passive infrared (PIR) technology. When the sensor detects occupancy, it turns on controlled outlets. When the space becomes vacant, the sensor turns off these outlets automatically after the preset time delay expires.
Plug loads account for an increasing percentage of the total energy consumed by building up to 15 to 20% in homes and commercial buildings. According to the EPA, "energy consumption by office equipment represents the fastest growing use of electricity in the country."
How much energy can users save?
A single workspace can consume 1,500 kWh each year with an average cost of $175 (and growing)! Add up the cost of every workspace and the amount is staggering. Isole can dramatically cut this cost with energy savings of up to 50%.
Product Overview
Description
The Isole IDP-3050 is an energy-saving control system that provides maximum surge and noise suppression while keeping plug load equipment off when there is no occupancy. It consists of an eightoutlet power strip and a personal occupancy sensor.
Operation
The IDP-3050 turns plug load devices on and off based on occupancy. The personal sensor connects to the eight-outlet power strip with the attached cable. The power strip contains six outlets controlled by occupancy and two outlets that are uncontrolled. The IDP-3050 automatically turns all controlled devices on when the workspace is occupied, and off when the workspace has been unoccupied for the user-defined time delay. Uncontrolled devices remain on regardless of occupancy.
Surge Suppression
The power strip provides a high degree of surge suppression that protects connected equipment against threats like power surges, lightning strikes and voltage spikes. It features a resettable circuit breaker and two LEDs that indicate that the outlet is wired and grounded properly and the surge protection is functioning.
Application
The IDP-3050 is ideal for controlling task lighting and computer monitors. Additional devices for the controlled outlets include space heaters, fans and other equipment that can be turned off during unoccupied periods. Devices such as CPUs and fax machines should be plugged into the uncontrolled outlets. Applications include workstations, open office cubicles, offices and engineering stations.
Features
Power Strip:
- Eight outlets; six controlled, two uncontrolled
- Surge and noise suppression protects desktop equipment
- Ground protected for safety; will not operate without a grounded outlet
- Two LEDs to indicate: 1) correct wiring and grounding; 2) surge protection is functioning
- Installation requires no hardwiring
- Flat offset plug for wire management
- One uncontrolled outlet and one controlled outlet are wall-transformer-enabled
- Plugs into a standard three-prong outlet
Personal Sensor
- Uses latest passive infrared (PIR) technology to detect occupancy
- User-adjustable time delay of 30 seconds to 30 minutes
- Multi-level Fresnel lens for superior occupancy detection
- 120° coverage, up to 300 square feet
- ASIC technology reduces components and enhances reliability
- Instantaneous response time
Specifications
Power Strip:
- Electrical rating: 120VAC, 12A, 50/60 Hz
- 12A dry contact relay
- Six-foot black cord
- Transformer provides power to sensor
- Mounts with screws or double-sided tape
- UL 1449 rating: 600V
- Circuit: High-energy, multistage hybrid
- Noise filtration: 0-25db (94.38%)
- Joule rating: 740 joules
- Maximum surge amperage: 48,000 Amps
- Protection modes: 500V L-N, 600V L-G, 600V N-G
- Response time: instantaneous
- Let-through voltage: 140V
- Initial clamping voltage: 200V
- UL and CUL listed; five-year warranty
Personal Sensor:
- Nine-foot connector cable
- Supply voltage: 12 VDC
- UL and CUL listed; five-year warranty
|
|
|